|
|
The First in a Long Line of Leaders
ISOLINE TM 2CR-5/6 with Active Fixation Isodiametric structure 7.8F lead body diameter Dual Coil Steroid Eluting Lengths: 58 cm and 65 cm EasyTurn System for Quick Placement5 EasyTurn is specially designed for use with ISOLINE active fixation leads, providing:
ISOLINETM 2 CR-5/6 - Electrical Performance
Internal clinical validation Isoline 2CR-6, nominal values at implant
ISOLINETM 2 CR-5/6 - Technical Data
ISOLINETM 2 CT-5/6 - Electrical Performance
Internal clinical validation Isoline 2CT-6, nominal values at implant
Intended uses, warnings and precautions
1.Results in an internal study demonstrate that a similar lead with the same polyurethane overlay, UW28D is at least 201 times more resistant to abrasion in this model than the non-polyurethane coated UC28D lead (465179 / 2312 = 201). 2.Redundant Insulation: ETFE coating, Silicone 3.In clinical evaluations, 100% of investigators had a good or very good overall impression of the Isoline 2CT lead handling characteristics. 3.In clinical evaluations, 83.3% of investigators had a good or very good overall impression of the Isoline 2CR lead handling characteristics. 4. In clinical evaluations, 70% of investigators characterized the lead placement time of Isoline 2CR as fast and 64% of investigators characterize the lead placement time of Isoline 2CT as fast. 5. Isoline Implant Manual N923C Pg 7 item 4&5, Single stylet to position the lead and extend the helix 6. Isoline Implant Manual N923C Pg 7 – item 4&5, Electrical measurements can be made with the stylet in place and the helix retracted 7. Isoline Implant Manual N923C Pg 7, item 6 (8 to 10 turns) and 7, two platinum – iridium radio-opaque markers to enable physicians to see that the helix is fully extended or retracted |
|
|||
